安装Vpn(简易流程，参数自改)

命令流程

yum install epel-release -y
yum install wireguard-tools -y
mkdir /etc/wireguard
touch /etc/wireguard/wg0.conf
echo "net.ipv4.ip_forward = 1" >> /etc/sysctl.conf
sysctl -p
sudo rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
sudo rpm -Uvh https://www.elrepo.org/elrepo-release-7.0-4.el7.elrepo.noarch.rpm
sudo yum install kmod-wireguard wireguard-tools
sudo modprobe wireguard
lsmod | grep wireguard
//启动
wg-quick up wg0
//重启服务器
beroot

wg0.conf内容

[Interface]
# 指定为服务器生成的私钥
PrivateKey = 
# VPN 接口的 IP 地址
Address = ip/端口
DNS = 114.114.114.114


[Peer]
# 指定为服务器生成的公钥
PublicKey = MTRsYdrZveOhrCYR8gJ6ljKf9JJVpylD71J74wsXhDg=
# 指定为服务器生成的对称密钥
PresharedKey = BOfLQmA9cS0OTaHx3Q3X2vUCM5Xv3iiPXL+4qgC3t1s=
# VPN 接口的 IP 地址
AllowedIPs = ip/端口
PersistentKeepalive = 25
#物理服务器的ip地址
Endpoint = ip:端口